Spare Tire Scissor Jack Handle Lug Nut Tool Kit OEM For Chevy Silverado 1500 / GMC Sierra 1500 Spare Tire Tool Kit

Price: Click Button for Price
Product prices and availability are accurate as of 2020-09-25 20:09:47 UTC and are subject to change. Any price and availability information displayed on http://www.amazon.com/ at the time of purchase will apply to the purchase of this product.
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Manufacturer Description

The scissor jack, with tooth gears, can extend from 90mm(close position) to 360mm, more than enough to lift most vehicles. Easy to operate using the chromed crank with speed handle.
Condition: Brand new
Minimum height: about 90MM
Maximum height: approximately 360MM
Lifting: 2.0T
Material: Steel
Net weight: 2.1KG
Item Size: 35*8.5*8.5 (L×W×T)
Scope: Suitable for small and medium sized vehicles. Such as: For cars/Buick/Santana/Vietnam and other vehicles.

Packing include:
Scissor jack * 1
Handle * 1

HEIGHT/CAPACITY CURVE
This device is designed to sustain the following loads at these specified heights. DO NOT EXCEED the rated capacity for each position.
Before Use:
1. Check before each use for abnormal conditions such as cracked welds, leaks, damaged, loose or missing parts.
2. Inspect the jack immediately if lift is believed to have been subjected to an abnormal load or shock.
3. If the jack is found to be damaged, it should be removed from service until properly repaired.

OPERATING INSTRUCTIONS
1. Insert the jack handle into the hole of the handle socket.
2. Make sure that the saddle is correctly positioned. To prevent damage to the jack, do not move the jack while the handle is intact in the socket.
3. To raise load, use one hand to hold the front part of the handle and use the other hand to turn at the rear and of the handle clockwise.
4. To lower load, use one hand to hold the front part of the handle and use the other hand to turn at the rear and of the handle counterclockwise slowly.

CARE AND MAINTENANCE:
1. When jack is not in use, lifting arm should be in full down position.
2. Always keep jack clean and keep the screw and bearings well lubricated.
3. Store the handle with care.

Product Features

This premium, heavy duty steel tire wrench set includes 4 pieces and a convenient carrying case. This set is a replacement for set # 22969377 (as well as older part number 20782708) that came with the vehicle. This is a high quality tire wrench set priced far below the dealer price! For 2000-2014 Chevy Silverado (excludes hybrid); For 2000-2014 GMC Sierra (excludes hybrid) We Are The Factory Who Specialize In Producing The Car Accesories Many Years! High Quality & Good Service!With 2 Years Warranty and Friendly, Easy-to-Reach Support. Buy with Confidence!